• DOK-DIAX02-DDS02.1*ANA-ANW1-EN-E1,44 • 12.96
26
2. The digital intelligent AC servo drive with ANALOG interface
Software module
Fig. 21: Designations of software module features
ENA3A-Abb12/InbetrDDS
DSM 2.1-E11-01RS
DSM 2.1
SN . . . . . . . . . .- . . . A00S02
Software version
Serial number
Abbreviated type code
Type code of the software module
Bar code
Matching of the drive controller to the motor and of the AC servo drive to
the machine mechanics is done by means of parameters stored in the
software module.
The software module stores the operating software and the parameters.
If a unit has to be replaced, the new drive controller does not require to
be matched to the motor or the machine. This is done automatically by
plugging in the old software module into the new drive controller.
Software modules can be duplicated for use on other identical machines
or for security purposes. Duplication is done using the serial interface.
The drive-related parameter values calculated by INDRAMAT are
stored in the motor feedback and are activated on request during
commissioning.
Application-related parameters are set on site to machine-dependent
values.
The documentation and management of application-related
parameters is the responsibility of the customer.
The latest state of the art (software module update) for operation of the
drive is supplied without any change being made to the ordering code
(type designation) of the software module. Updated software modules
are compatible with software modules already in the field.
Benefit in the event
of unit replacement
Duplication
Standard software modul
Compatibility of
software modules
