MANN+HUMMEL IQORON
MANN+HUMMEL Industrial Filters
6
5
Installation
5.1
General information
Check that the scope of delivery is complete
and that there are no signs of damage.
If parts of the delivery are damaged, please
inform your sales partner.
In order to maintain a high degree of pre-
filtering and minimal soiling of the filter
element by dust, thus ensuring a long service
life of the filter and low levels of maintenance,
take the following into account when choosing
the installation location:
Assemble the filter in a splashproof, low-
dust area (e.g. not in the spraying range of
wheels).
There
must
be
sufficient
space
to
disassemble
the
elements
and
for
inspection and maintenance work.
Fig. 3
Scope of delivery
5.2
Securing the filter
Secure the IQORON on a stable base, where
it will not be subject to vibration, using
screws or stud bolts, washers and self-
locking nuts (M8) (tightening torque 10 +/- 2
Nm). Depending on the version, threaded
inserts M8 and/or fixation eyelets are
provided on the filter for this purpose.
Slide on the clean air and ejector hose and
tighten in place with suitable hose clips
taking care not to deform the connection.
Screw the maintenance indicator or switch to
the connecting thread (M10x1, Pos. 7) or
seal the connection with a cap nut.
The clean air connection (Pos. 8)
must be horizontal or point upwards
so that no dirt can drop into the
clean air lines during maintenance.
The dust discharge connection (Pos. 5)
should point downwards so that the pre-
filtered dirt can be discharged.
In order to discharge the pre-filtered
particulate matter reliably from the
filter
housing,
the
ejector
or
extractor fan must be set up so that
at least 3.5 mbar vacuum is applied
at the dust discharge connection
(Pos. 5) when the engine is
operating at a partial load and at
least
9
mbar
vacuum
when
operating at full-load.
Option
