Manitou M 26-2+H ST3B, Operator'S Manual

Page: 89 / 152

2-67
16 - FORWARD/NEUTRAL/REVERSE GEAR SELECTION
When operating this control, the lift truck should be travelling at slow speed and not
accelerating. When the reverser is in the neutral position a mechanical lock prevents
an accidental shifting movement.
• FORWARD: Lift slightly and push the lever forwards (position A).
• REVERSE: Lift slightly and pull the lever backwards (position B).
• NEUTRAL: To start the lift truck, the lever must be in neutral (position C).
NOTE: As an OPTION, reversing lights and an acoustic reversing alarm indicate that
the lift truck is running in reverse.
SAFETY FOR MOVING THE LIFT TRUCK
- Authorisation to move the lift truck is controlled by an electronic unit. The operator
must observe the following sequence to move the truck forwards or backwards:
• 1 - sit down correctly in the driver’s seat,
• 2 - release the parking brake,
• 3 - engage forward or reverse movement.
- To stop the lift truck, he must observe the following sequence:
• 1 - set the forward/reverse selector to neutral,
• 2 - engage the parking brake,
• 3 - get out of the lift truck.
NOTE: If the operator leaves the driving cab with forward or reverse engaged, a continuous alarm will sound. While this
alarm sounds, the operator can simply sit back in the seat and continue advancing or reversing. If the alarm becomes
discontinuous, the operator must sit back in the seat, put the selector back in neutral and select forward or reverse
if he wishes to continue moving.
17 - PARKING BRAKE
To prevent accidental loosening or release, the lever is fitted with safety locking.
- To apply the parking brake, pull the lever backwards (position A).
- To loosen the parking brake, release and push the lever forwards (position B).
18 - HYDRAULIC CONTROLS
t
IMPORTANT
t
Do not attempt to alter the hydraulic system pressure by interfering with the pressure regulating valve. In the event of
suspected malfunction, contact your dealer. ANY ALTERATION MAY RENDER THE WARRANTY NULL AND VOID.
Use the hydraulic controls carefully without jerking, to avoid accidents caused by shaking the lift truck.
Using the hydraulic controls is only possible if the driver is present and correctly sat
on his seat.
LIFTING THE LOAD
- The lever A backwards when lifting.
- The lever A forwards when lowering.
TILTING THE MAST
- The lever B backward for backward tilting.
- The lever B forwards for forward tilting.
ATTACHMENT
- The lever C forwards or backwards.
A
B
C
A
B
C
A
B
www. duma -rent.com