Manitou M 26-2+H ST3B, Operator'S Manual

Page: 121 / 152

3 - 25
D10 – CAB VENTILATION FILTERS
CLEAN
- Remove the protective casing 1.
- Lift out cab ventilation filter 2.
- Clean the filter with a compressed air jet.
- Check its condition and change if necessary (see: 3 - MAINTENANCE: FILTERS
CARTRIDGES AND BELTS).
- Refit the filter and protective casing.
D9 – PARKING BRAKE LEVER MECHANISM
GREASE
- Clean and grease articulation axles 1 with grease (see: 3 - MAINTENANCE: LUBRICANTS
AND FUEL).
D8 – HYDRAULIC RETURN OIL FILTER CARTRIDGE
CHANGE
t
IMPORTANT
t
Thoroughly clean the outside of the filter and its surroundings before any intervention in order to prevent any risk of
polluting the hydraulic circuit.
Stop the I.C. engine and remove the pressure from the circuits by acting on the hydraulic
controls.
- Open the engine bonnet.
- Remove the side panel 1.
- Unscrew the fastening screws of the cover 2.
- Remove the hydraulic return oil filter cartridge 3 and replace with a new one
(see: 3 - MAINTENANCE: FILTERS CARTRIDGES AND BELTS).
- Make sure that the cartridge is correctly positioned and refit the cover 2.
1
2
88 1
1
1
1
2
3
www. duma -rent.com