Manitou M 26-2+H ST3B, Operator'S Manual

Page: 116 / 152

3 - 20
C8 – REAR WHEELS REDUCERS OIL LEVEL
CHECK
M 26/30-4+H ST3B M 26/50-4+H ST3B
Place the lift truck on level ground with the I.C. engine stopped.
- Check the level on each rear wheel reducer.
- Place level plug 1 in a horizontal position.
- Remove the level plug; the oil should be flush with the edge of the hole.
- If necessary, add oil (see: 3 - MAINTENANCE: LUBRICANTS AND FUEL) by the same hole.
- Refit and tighten level plug 1 (tightening torque 34 to 49 N.m).
C6 – FRONT WHEELS REDUCERS OIL LEVEL
CHECK
Place the lift truck on level ground with the I.C. engine stopped.
- Check the level on each wheel reduction gear.
- Place level plug 1 in a horizontal position.
- Remove the level plug; the oil should be flush with the edge of the opening.
- If necessary, add oil (see: 3 - MAINTENANCE: LUBRICANTS AND FUEL) through the
same opening.
- Refit and tighten the level plug (tightening torque 34 to 49 N.m).
C7 – REAR AXLE DIFFERENTIAL OIL LEVEL
CHECK
M 26/30-4+H ST3B M 26/50-4+H ST3B
Place the lift truck on level ground with the I.C. engine stopped.
- Remove the level plug 1 the oil should be flush with the edge of the hole.
- If necessary, add oil (see: 3 - MAINTENANCE: LUBRICANTS AND FUEL) through the
filler port 2.
- Refit and tighten level plug 1 (tightening torque 34 to 49 N.m).
C5 – FRONT AXLE DIFFERENTIAL OIL LEVEL
CHECK
Place the lift truck on level ground with the I.C. engine stopped.
- Remove the level plug 1 the oil should be flush with the edge of the hole.
- If necessary, add oil (see: 3 - MAINTENANCE: LUBRICANTS AND FUEL) by the same hole.
- Refit and tighten level plug 1 (tightening torque 34 to 49 N.m).
1
1
2
1
1
www. duma -rent.com