Front and Rear Panel Illustration
1. Front Panel
1. USB JACK:
Used to connect to an external USB 2.0 device.
2. LED DISPLAY:
Used to display the time or channel information.
3. STANDBY:
Used to switch the set top box to on or standby.
4. STANDBY INDICATOR:
Used to visually show power state of the STB.
5. MENU:
Turns on main menu.
6. REMOTE CONTROL SENSOR:
Used to receive the signal from the remote control.
7. VOL +/-:
Used to increase/decrease the volume without using the remote
control.
8. CH +/-:
Selects the next/previous Channel without using the remote control.
9. OK:
Confirms an entry or selection.
2. Rear Panel
1. LNB IN:
This socket connects the LNB to receive the signal.
2. LOOP OUT:
This socket will bypass the RF signal to either your TV or another
video system.
3. SPDIF:
This socket connects to an optical socket on your surround sound system.
4. USB JACK:
Used to connect to an external Wi-Fi Antenna for Internet use.
5. HDMI OUT:
This socket connects to HDMI in device.
6. CVBS:
This socket outputs composite video signal.
7. Y/Pb/Pr:
These sockets connect to your TV component input terminals.
8. AUDIO L/R:
This socket outputs analog audio L/R adapter.
9. DC IN 12V:
This is used to connect the 12V DC adapter.
10. RS232:
Connect to serial port of PC for software update.
11. LAN:
Connect to RJ45 cable for internet connection
2
