(2) When this feature is set to HDMI, the available resolution options for
PA L mode are 720p_50Hz, 1080i_50Hz,1080p_50Hz, and AUTO, and for
NTSC mode are 720p_60Hz, 1080i_60Hz, 1080p_60Hz, and AUTO, while
you are not allowed to switch to the resolutions not supported by your T V.
(3) If there is HDMI connection between your box and TV, the default setting
of TV Resolution is AUTO; otherwise, the default setting is 576i.
(4) Any change made here will take at least one second to be effective.
5. Digital Audio Output:
you can set the format for your digital audio output.
(1) The options available here are LPCM and RAW.
(2) The default Digital Audio Output is LPCM.
6. Power On at:
By setting this option to TV or Menu, you can set your box
to show TV or Main menu the next time it turns on.
7. Auto Switch off:
you can set the time for how long your set-top box will wait for
the signal from the remote controller before it enters into sleep mode automatically.
The timer will start counting at once when there is no remote controller operation.
When the timer expires, the set-top box will go in to sleep mode.
8. TV Brightness:
you can set the brightness of the display, where the greater the
value the higher the brightness.
9. TV Contrast:
you can set the contrast of the display, where the greater the value
the higher the contrast.
10.TV Saturation:
you can set the saturation of the display, where the greater the
value the higher the saturation .
Advance Timer
With this feature you can schedule up to 10 events. The event timers can turn on or
record a specific channel for the amount of time you set.
1. Add Event: you can schedule an event here.
2. Edit Event: you can edit the existing events here.
3. Delete Event: you can delete an existing event
.
(1)Press < Red> button to delete the event.
(2)Press<OK> button to confirm your delete operation.
After an event is deleted successfully, the other events in the list will be sorted
automatically by their start time.
Notice:
(1)When your new event conflicts with an existing event in some way, for example,
a time-range overlap, a message box will appear to notify such confliction and the
attempt fails.
(2)After your new event is added successfully, the events in the list will be sorted
automatically by their start time, earliest first.
(3)When manually entering a channel number, if the number exceeds maximum
channel number available here, the system will automatically adjust the number to a
proper one.
13
