(1)Wired Network
If you want to use Wired Network, you first enter main menu to set Network interface
in Wired Network, and there are two modes.
[AUTO], it will automatically get IP address to connect.
[Manual], you need manually input IP address, Net Mask address, Gateway
address and DNS address.
(2)Wireless Network
If you want to use Wireless Network, you first enter main menu to set Network
interface in Wireless Network, and select Wireless Network item and press OK
button to get hot point. If you can get any hot point, please try to press RED button to
refresh it. You select one hot point and press BLUE button to connect it, this connect
is ok when the true displays in this item.
System Setting
In System Setting menu, you can change the system parameters and configure your
set-top box.
(1) Press < Menu> button to open the main menu.
(2) Select System Setting using < Left/Right> buttons.
(3) Press <Up/Down>to select your desired submenu, where the options are
Language, OSD Style, Time, TV Setup, Adv Timer, Parental control, Update&
Backup, and Factory setting.
(4) Press < OK> to enter into the selected submenu.
Notice:
(1) In the System Setting menu, you can use <Up/Down> buttons to switch between
the System Setting submenus.
(2)The system setting submenus available here includes: Language/OSD Style/Time/
TV Setup/ADV Timer/Parental control, Update & Backup and Factory setting.
Language
In Language menu, you can switch OSD language/audio language (TV program must
supports multi audio language)/subtitle language (TV program support multi subtitle
language).
OSD Style
You can set the OSD display options, including the transparency and banner display
time.
Time
1. Time Zone:
you can set your time zone. However, the time will be displayed correctly
only when connected to the Network time server (In order to have the correct time
you need to connect the LAN cable; to get internet connection).
11