M&R Challenger II 12 COLOR, Manual, Page: 67 / 176

PREVENTIVE MAINTENANCE PROCEDURE
CHALLENGER Series II Bulletin No. PH3
Maintenance Point
(AC Drive Print Stations Only)
Frequency Interval
Procedure Information
Lubricate the print carriage assembly linear bearing using Permatex Super lube with Teflon (M&R Part No. 7018031)
Weekly
Tools required: 1 - M&R Part No. 7018031 Permatex Super
Lube
1 - Standard pump action grease gun
59
The frequency of the following preventive maintenance procedure is
based on a 8 hour daily production shift or 40 hour work week.
CAUTION!
To prevent possible injury
to personnel and/or damage to the
equipment, lock out and tag the electri-
cal service and compressed air supply
to this equipment. Refer to pages 55
and 56 of this manual for information
regarding lock out/tag out procedures.
CAUTION!
1. Using a standard pump action grease gun, apply 3 or 4
applications of Permatex Super Lube to the zerk grease fit-
ting located between the print carriage squeegee and flood
pressure air cylinders.