M&R Challenger II 12 COLOR, Manual, Page: 38 / 176

Challenger II
mrprint.com
May 2005
M&R Printing Equipment, Inc. - Glen Ellyn, Illinois
E 300 Operator Interface
30
Print Up/Down", "Skip T-Shirt/Sensor", "InkDip Every",
"Glue Applicator" and ">Servo Index Options".
M&R REVOLVER SEQUENCING PROGRAM (Optional)
(U.S. Patent No. 5,595,113)
The first sub-menu item is "Revolver mode".
NOTE: The "REVOLVER" option only
appears on presses equipped with the
"REVOLVER" program option.
To access the Revolver mode of operation, press the
"ARROW DOWN" key one time, then press the "ARROW
RIGHT" key so that the flashing cursor is located under the
">" to the left of the letter "R" in "Revolver Mode", then
press the "ENTER" key one time. The "Revolver Mode" dis-
play screen contains "Revolver Mode ON/OFF", "Index
Delay", "Stop Alarm", "Enter Program", "Revolution
Number", "Pallet No.:", "Job No.", "Job Clear" and "Alarm
Enabled ON/OFF". When you first enter into this message
screen, you will note that the flashing cursor automatically
locates beneath the letter "R" on the word "Revolver" in
"Revolver Mode". To activate the revolver mode simply
press the "ENTER" key one time. The "ON/OFF" indication
will now change to "ON". (See Figure 8 and 9 at the right)
Pressing the "ENTER" key once again will change the indi-
cation to "OFF". Press the "ARROW DOWN" key one time,
then press the "ARROW RIGHT" key. The flashing cursor is
now located under the letter "I" in the word "INDEX". Press
the "ENTER" key one time. You will be presented with a
"WAIT" indication, after which the current index dwell time
as programmed under the "TIMERS" menu will be activated.
The "INDEX DELAY" L.E.D. will display a red indication when
the timer is inactive and a green indication when the "INDEX
DELAY" is activated.
Press the "ARROW DOWN" key one time, then press the
"ARROW RIGHT" key one time to access the "Stop Alarm"
menu item. When the flashing cursor is located under the
letter "S" in the word "STOP", press the "ENTER" key one
time. You will see the "WAIT" message appear in the mes-
sage window. This control feature allows the system
Operator to over-ride the audible alarm signal which indi-
cates the approaching end of a programmed print sequence
in the Revolver mode of operation. (See Figure 9 at the right)
Figure 8
i
IMPORTANT!
Figure 9