M&R Challenger II 12 COLOR, Manual, Page: 33 / 176

Challenger II
mrprint.com
May 2005
M&R Printing Equipment, Inc. - Glen Ellyn, Illinois 25
E 300 Operator Interface
E 300 OPERATOR INTERFACE -
The Operator Interface control panel is divided into 5 differ-
ent control areas as follows. (See Figure 1 at the right)
a. Along the top width of the control are status L.E.D. indi-
cators each of which can display either a green or red indi-
cation based on the various operational parameters listed
below each individual indicator. The operational parame-
ters, listed form left to right are - INDEX DELAY, FLASH
TIMER, QUARTZ TIMER/REVOLVER, INDEX ON PROX,
GLUE, CCW/CW (Counterclockwise & Clockwise), DOUBLE
INDEX and SERVO NOT READY.
NOTE: If your press has been ordered
with the "Revolver" print sequencing
program, then the "QUARTZ TIMER"
L.E.D. indicator will be replaced with
"REVOLVER".
b. Directly below the L.E.D. indicators is the L.C.D. display
window. Information regarding operation, programming and
system status are displayed here.
c. Directly below the L.C.D. display window are the individ-
ual Status and Program control buttons with L.E.D. indica-
tors. These control buttons are used to program the on-
board PLC for various requirements, and to access system
status, useful for trouble shooting procedures. Listed from
left to right they are - COUNTERS, TIMERS, OPTIONS,
TESTS, MPR DATA, SERVICE DATA, DATE/TIME and M&R
INFO.
d. Located at the bottom left of the control is the alpha
numeric keypad used to input information for various pro-
gramming parameters.
e. To the lower right of the control panel is the programming
function buttons. Starting at the 12 O'clock position and
moving clockwise they are - ARROW UP, ACKNOWLEDGE,
ARROW RIGHT, MAIN, ENTER, ARROW DOWN, BACK
SPACE, ARROW LEFT, PREVIEW and ALARM LIST.
Figure 1
a.
b.
c.
d.
e.
i
IMPORTANT!