M&R Challenger II 12 COLOR, Manual, Page: 53 / 176

Challenger II
mrprint.com
May 2005
M&R Printing Equipment, Inc. - Glen Ellyn, Illinois 45
E 300 Operator Interface
MAIN MENU SCREEN
PLC Identity No.
Program Version No.
MTA No.
SERVO DRIVE TEST
Regenerative load ratio: 0%
Effective load ratio: 0%
Peak load ratio: 0%
Motor Rotational Speed: 0.0 rpm
Actual Present:
0 pls
Feed Present: 0 pls
Deviation Counter: 0 pls
Motor Current: 0 R
Ready: OFF
Servo On: OFF
Zero Point Pass: OFF
At In-Position: OFF
Zero Speed: OFF
Torque Limit: OFF
Servo Alarm: OFF
Servo Warning: OFF
Automatic Tuning: 0
Load Inertia Ratio: 0
Position Control Gain1 0
Speed Control Gain1: 0
Position Control Gain2: 0
Speed Control Gain2: 0
Speed Incremental Comp: 0
Servo Amp S/W Number:
Parameter Error 0-15:
0000
Parameter Error 16-31: 0000
Parameter Error 32-47: 0000
Servo Status: 0000
HARDWARE TEST
>Panel Test
>Proximities Test
>Motion Card Test
>Servo Drive Test
>Servo/Motion Card History
>Other Tests
SERVO MOTION CARD HISTORY
1:0000-NONE
2:0000-NONE
3:0000-NONE
4:0000-NONE
5:0000-NONE
6:0000-NONE
OTHER TESTS
Heads Print Push buttons 1 OFF
Heads Print Push buttons 2 OFF
Heads Print Push buttons 3 OFF
Heads Print Push buttons 4 OFF
Heads Print Push buttons 5 OFF
Heads Print Push buttons 6 OFF
Heads Print Push buttons 7 OFF
Heads Print Push buttons 8 OFF
Heads Print Push buttons 9 OFF
Heads Print Push buttons 10 OFF
Heads Print Push buttons 11 OFF
Heads Print Push buttons 12 OFF
Heads Print Push buttons 13 OFF
Heads Print Push buttons 14 OFF
Heads Print Push buttons 15 OFF
Heads Print Push buttons 16 OFF
Heads Print Push buttons 17 OFF
Heads Print Push buttons 18 OFF
Yellow Cords: OFF
No T-Shirt Sensor: OFF
Foot Pedal: OFF
Air Pressure Switch: OFF
PLC ERROR: 0