40
TPM 087/12
10.1.
Damper casings and blades are made of fire resistant asbestos free boards made of mineral fibres.
10.2.
Fasteners are galvanized.
12.1.
Dampers are delivered on a pallets. Another required packaging system should be approved
and agreed by manufacturer. Packaging material is not returnable in case that another
packaging system ( material ) is required and used and it is not included into final price of damper.
12.3.
Dampers are transported by box freight vehicles without direct weather impact, there must not
occur any shocks and ambient temperature must not 40 °C. Dampers must be protected
against mechanic damages when transported and manipulated. During transportation, the
damper blade must be in the "CLOSED" position.
12.2.
For unloading and further manipulation with the damper is necessary to use appropriate tooling
( forklifts ) due to damper weight. Dampers are fragile.
10. Material
IV. MATERIAL, FINISHING
V. INSPECTION, TESTING
11. Inspection, testing
11.1.
The appliance is constructed and preset by the manufacturer, its operation is dependent on
proper installation and adjustment.
12. Logistic terms
VI. TRANSPORTATION AND STORAGE
12.4.
Dampers are stored indoor in environment without any aggressive vapours, gases or dust. Indoor
temperature must be in the range from -5 °C to +40 °C and maximum relative humidity 80 %.
Dampers must be protected against mechanic damages when transported and manipulated.
VII. ASSEMBLY, ATTENDANCE, MAINTENANCE AND REVISIONS
13. Assembly
13.1.
Assembly, maintenance and damper checks can be provided only by qualified persons, i.e.
"AUTHORIZED PERSONS" that have been trained by the manufacturer.
Trainings are provided by the MANDÍK, a.s., which issues makes out a proficiency "CERTIFI-
CATE" valid for 5 years. It can be renewed by the "AUTHORIZED PERSONS" themselves,
directly at the manufacturer.
When the "CERTIFICATE" expires, it becomes invalid and is eliminated from the registration.
Only professional personnel that undertake guarantee for the completed work can be trained.
13.2.
All effective safety standards and directives must be observed during damper assembly.
13.3.
To ensure reliable smoke exhaust damper function it is necessary to avoid blocking the closing
mechanism and contact surfaces with collected dust, fibre and sticky materials and solvents.
13.4.
Manual operation
Without power supply, the damper can be operated manually and fixed in any required
position.
Summary of Contents for SEDM
Page 1: ......
