www.mc-techgroup.com
SP30-H../EX2 | 1.02.00
5
3
ELECTRICAL STANDARDS
The electrical standard of electrical equipment corresponds to the safety regulations concerning the EN
60079-15, EN 61010 and the directive 2014/34/EU (equipment group 3 in hazardous areas);
Producer :
M&C TechGroup Germany GmbH
Rehhecke 79
40885 Ratingen
Germany
4
SAFETY INSTRUCTIONS
Follow these basic safety precautions during installation, commissioning and operation of the
device:
Read this instruction manual before commissioning and operating the product. Please make sure to
follow all warnings and safety instructions.
Work on electrical equipment is only to be carried out by trained specialists as per the regulations
currently in force.
Attention must be paid to the requirements of
VDE 0100
when setting high-power electrical units with
nominal voltages of up to 1000V, together with the associated standards and stipulations.
For use in hazardous area observe the relevant national and international instructions and regulations.
Check the details on the type plate to ensure that the equipment is connected up to the correct mains
voltage.
Protection against touching dangerously high electrical voltages. Before opening the equipment, it must
be switched and hold no voltages. This also applies to any external control circuits that are connected.
The equipment is only to be set within the permitted range of temperatures and pressures.
Check that the location is weather-protected. It should not be subjected to either direct rain or moisture.
Installation, maintenance, inspections and any repairs of the devices must be carried out only by
qualified skilled personnel in compliance with the current regulations.
