www.mc-techgroup.com
SP30-H../EX2 | 1.02.00
7
7
USED TERMS AND SIGNAL INDICATIONS
D AN G E R !
This means that death, severe physical injuries and/or important
material damages
will occur
in case the respective safety measures
are not fulfilled.
W A R N I N G !
This means that death, severe physical injuries and/or important
material damages
may occur
in case the respective safety measures
are not fulfilled.
C A U T I O N !
This means that minor physical injuries
may occur
in case the
respective safety measures are not fulfilled.
C A U T I O N !
Without the warning triangle means that a material damage may occur
in case the respective safety measures are not met.
A T T E N T I O N !
This means that an unintentional situation or an unintentional status
may occur in case the respective note is not respected.
N O T E !
These are important information about the product or parts of the
operating manual which require user’s attention.
QUALIFIED PERSONNEL
‘Qualified personnel’ are experts who are familiar with the installation,
commissioning, maintenance and operation of these types of
products. The following knowledge is at least required for the work:
•
Instructed person in EX-protection
•
Trained person in the electrotechnical field
•
Detailed knowledge of the manual and the applicable safety
regulations
These are important information about the product or parts of the
instruction manual referring to operating in hazardous areas.
High voltages!
Protect yourself and others against damages which might be caused
by high voltages.
Hot surface!
Contact may cause burn! Do not touch!
