6 Storing the ORKAN VARIO plough
The plough should be stored out of the weather. In the absence of a covered space,
the agricultural machinery may be stored outdoors. The plough should be stored in a
location where it is not hazardous to people and the environment. In the event of long-
term storage of the agricultural machinery outdoors, maintenance of its working parts
should be repeated if its maintenance layer becomes washed off. After its disconnection
from the tractor, the agricultural machinery should be support on hard and level ground
to maintain a stable balance. All working parts should rest on the ground. The plough
should be lowered gently to avoid working parts impacting with the hard ground. After
the agricultural machinery has been laid up, its suspension should be disconnected and
disengaged from the tractor.
7 Dismantling and disposal
The agricultural machinery, if used in accordance with the instructions given in the
manual, will remain serviceable for many years, but any worn or damaged parts must be
replaced. In the event of damage (cracks in or deformation of the frame) that compromises
the quality of the agricultural machinery and poses a danger if it continues to be operated,
the agricultural machinery must be scrapped. Disassembly of the agricultural machinery
should be carried out by persons who are familiar with its construction. Such dismantling
operations must be performed after the agricultural machinery has been set on a level
and hard surface. Dismantle all the metal parts to be scrapped and send any plastic parts
to a disposal facility. Oil should be poured into a sealed container and sent to a recycling
facility
Warning! Take all necessary precautions when dismantling the agricultural
machinery and use proper tools for the job as well as personal protection
clothing and equipment. Dismantled parts should be disposed of in accordance
with environmental protection requirements.
8 Technical characteristics
Technical specifications
28
Type
Operating
width
Frame
beam
Ground
clearance
of frame
Distance
between
plough
bodies
Number
of plough
bodies
Minimum
pulling
power
Weight
cm
mm
cm
cm
pcs.
HP
kg
ORKAN
VARIO 3+
90 -150
120x120x8
82
102
3
90
1470
ORKAN
VARIO 3+1
120 - 200
4
110
1670
ORKAN
VARIO 4+
120 - 200
140x140x10
4
110
1770
ORKAN
VARIO 4+1
150 - 250
1
130
1968
