20
EN
If your hands feel uncomfortable or the skin color of your hands changes when
using the tool, you must immediately interrupt your work. Take enough breaks.
Failure to take enough breaks may result in the hand-arm vibration syndrome.
CAUTION!
Depending on the application of the product, the actual vibration values may deviate
from the indicated values! Take measures to protect yourself against vibrations! To
this end, you must take the whole work flow into account, i.e. also the time when the
tool is operated without load, or when the tool is switched off! Appropriate measures
include the regular maintenance and care of the tool and tool inserts, keeping your
hands warm, regular breaks as well as a reasonably planned work flow! If you use the
tool frequently, you should contact your product retailer and purchase anti-vibration
accessories (handles), if available. A certain noise exposure caused by this tool cannot
be avoided. Any work involving loud noise must be accomplished at times allowed and
intended for this purpose. If applicable, observe rest periods and restrict your working
time to the essentials. The operator and persons in the vicinity must wear ear protec-
tion. Maintain the tool in accordance with the instructions in the manual.
CLEANING AND MAINTENANCE
Always pull out the mains power plug before starting any cleaning work.
1) Cleaning
• Keep all safety devices, air vents and the motor housing free of dirt and dust as
far as possible. Wipe the equipment with a clean cloth or blow it with compressed
air at low pressure.
• We recommend that you clean the device immediately each time you have
finished using it.
• Clean the equipment regularly with a moist cloth and some soft soap. Do not use
cleaning agents or solvents; These could attack the plastic parts of the
equipment. Ensure that no water can seep into the device.
2) Maintenance
There are no parts inside the equipment which require additional maintenance.
REPAIRS
Only use accessories and spare parts recommended by the manufacturer. If the
equipment should fail some day in spite of our quality controls and your maintenance,
only have it repaired by an authorized electrician.
ENVIRONMENTAL
Processing of electric and electronic equipment at the end of their service life
(applicable in member countries of the European Union and other European
countries operating a selective waste collection system). This symbol, affixed to the
product or its packaging, indicates that the product must not be processed with
household waste. It must be brought to an electric and electronic waste collection
point for recycling and disposal. By ensuring the appropriate disposal of this product
you also help in preventing potentially negative consequences for the environment
and human health. The recycling of materials helps preserve our natural resources.
For further information regarding the recycling of this product, please contact your
municipality local waste disposal center or the store where the product was
purchased.
Battery removal: This symbol indicates that the batteries supplied with this prod
uct must not be treated as general household waste. To remove them safety, you
must bring them to your retailer or discard or them in special containers provided for
the community. At the end of the device’s life, remember to remove the batteries.
Summary of Contents for M.DC.T.ID.B.20.50
Page 2: ...2 9 1 7 10 1 8 6 3 4 5 2 3 2 6 5 2 ...
Page 3: ...3 a 9 4 3 7 8 6 1 2 4 10 5 9 ...
Page 22: ......
