4
STEP 11
AF
AG
STEP 12
EK
STEP 13
a. Position the Spring Covers so the hook of
the Coil Springs (AC) are outside of the Inner
Covers (AF) and lined up with the holes in the
Outer Cover (AG).
b. Slide a 3/4” x 10” Spacer (EK) through the
holes in the Outer Covers and hook of the Coil
Springs.
c. Apply a small amount of Dark Lithium Grease
to the Spacer (EK) under the hook of the Coil
Springs (AC).
EK
AC
EJ
AG
EA
EC
Required For This Page:
(1)
10”
(Not
actual
length)
a. Have one adult lift the Coil Spring assembly up until the 3/4” x 10”
Spacer (EK) (installed in the previous step) lines up with the holes at
the back of the Spring Cams.
b. A second adult should slide a 5/8” x 9 1/2” Hex Bolt (EJ) through a
5/8” Flat Washer (EA), the Spring Cams, the 3/4” x 10” Spacer (EK)
and another 5/8” Flat Washer (EA)
c. Secure the Bolt completely with a 5/8” Nylock Jam Nut (EC).
EJ
EA
EA
EC
EK
(1)
(Not
actual
length)
(2)
(1)
11 1/4”
15/16” Wrenches
HH18600
AG
AF
AC
a. Slide the Coil Spring Inner Covers (AF) over
the Springs, with the small holes in the Inner
Covers toward the bottom of the Pole. Slide
the Coil Spring Outer Covers (AG) over the
Inner Covers. The holes on the Outer Covers
should be toward the top of the pole.
**A minimum of two adults are required for this step.**
