STEP B
TA
TB
TC
TC
TC
TC
TC
AA
AA
AA
AA
AA
AM
Note: Before digging, call to locate any buried utility lines.
a.
Dig a hole 48” deep and 21” square. The edge of the hole should
be flush with the edge of the playing court. If you live in an area
where frost heaves may pose a problem, consult your local building
inspector to determine the appropriate hole depth.
Note: The hole must be at least 48” deep.
b. Bell out the bottom of the hole.
Note: A square hole prevents the rotation of the concrete.
c. We recommend building a form to keep the top of the concrete
straight and square. Place the form so it is level with the playing
surface.
Note: There must be a 3-foot area behind the pole to allow the
user to adjust the Rim height.
21”
48”
STEP A
a.
Thread a 5/8” Hex Nut (TC) all the way onto each J-Bolt (AA).
b. Slide the threaded ends of the J-Bolts through the corner holes in
the J-Bolt Template (AM) and secure them completely with 5/8”
Hex Nuts (TC).
Note: Make sure the curved ends of the J-Bolts are in a rectangular
pattern as shown.
c. Insert the 5/8” x 2” Hex Bolt (TB) through the center hole in the
J-Bolt Template and tighten the Nut Coupler (TA) onto the Bolt as
far as it will go.
Required For This Page:
15/16” Wrenches
TA
TC
TB
(Not actual size)
(1)
(8)
(1)
EH0001
21”
Shovel
Tape Measure
