background image

Storage

• Turn off the product and disconnect it from the power source.

• Clean the product as described above.

• Store the product and accessories in a dark, dry and well-ventilated place, 

protecting it from freezing.

• Always keep the product out of the reach of children. The optimal storage tempera

ture is between 10 ° C and 30 ° C.

• We recommend you to store the product in its original packaging or protect it from 

dust with a suitable cloth cover.

• Store the product and accessories in their original packaging.

Noise and Vibration 

Sound Pressure Level L

pA

: 87 dB(A) 

Uncertainty/tolerance K

pA

: 3 dB 

Sound Power level L

WA

: 98 dB(A) 

Uncertainty/tolerance K

WA

: 3 dB 

Put on the hearing protectors/Earmuffs.

Noise can cause hearing loss.

Vibration emission value a

h,w

: 1,2 m/s² (uchwyt główny) 

a

h,w

: 1,1 m/s² (uchwyt pomocniczy) 

Uncertainty/tolerance K = 1,5 m/s² 

Attention!

- The stated total vibration emission values and the stated noise emission values 

have been measured based on a standardized measuring method (EN 62841-1 and 

EN 62841-2-5) and can be used to compare one power tool with another.

- The total values of vibration and noise emissions given can be used as a provisional 

load assessment.

Warning:

- The actual values of vibration and noise emissions may differ from the values given, 

depending on the way the power tool is used, and especially the type of workpiece.

- Try to minimize the stress caused by vibration and noise.

Examples of measures to reduce this load include wearing protective gloves while 

using the tool and limiting the working time. Take all operating time components 

into account (for example, periods when the power tool is switched off and periods 

in which it is switched on but runs without load).

ENVIRONMENTAL PROTECTION

EN

25

Mains Voltage

220-240 V 

~ (prąd zmienny) 

/ 50/60 Hz 

Input power

No Load Speed

Cutting depth at 

90° angle

Cutting depth at 

45° angle

Saw blade

Fixing of saw 

blade

Saw blade 

thickness

Protection Class

II 

2,4 mm

Ø 20 mm 

Ø 190 mm 

 43 mm

 65 mm 

1400 W 

2000-4800 min

-1

Disposal of the packaging

The packaging consists of cardboard and correspondingly marked 

plastics that can be recycled. Make these materials available for recycling.

Disposal of the appliance

Waste electrical products should not be disposed of with household waste. 

Please recycle where facilities exist. Check with your Local Authority or retailer 

for recycling advice.

Summary of Contents for M.AC.T.CS.230.1400.190




























Reviews: