EN
22
• Protect yourself and your surroundings from accidents by taking appropriate
precautions.
• Never look directly into the laser light.
• Do not point laser light at reflective surfaces, or at people or animals. Low-power
laser light can also damage your eyesight.
• Carefully! Activities other than those described here may result in hazardous
radiation exposure.
• Never open the laser module.
Remaining risks
The instruction manual for this power tool contains comprehensive information on
safe work with electric tools. Nevertheless, each power tool generates certain risks,
which cannot be completely ruled out even despite the use of appropriate safeguards.
Therefore, always exercise
care when operating power tools.
Other risks are, for example:
• touching moving parts or working elements;
• Injury due to impact by improperly mounted, workpiece or its fragments that may
break off;
• fire in the event of insufficient engine ventilation;
• hearing impairment when not using ear protectors while working;
Safe work also depends on the knowledge of the power tool by the people operating
it! The appropriate level of knowledge about a given power tool and the maintenance
of caution when working with it will minimize the remaining risks.
WARNING!
This power tool generates an electromagnetic field during operation.
Under certain conditions, this field may interfere with the operation of active or
passive medical implants.
To minimize the risk of serious or even fatal injuries, we recommend that people with
medical implants consult a doctor prior to using a power tool.
In case of an emergency
Familiarize yourself with how to use this product by reading this user manual.
Remember the safety rules and be sure to follow them. This will help you avoid risks
and dangers.
a) Never lose concentration when using this product; Thanks to this, you will notice
the danger in advance and react to it appropriately. Quick response avoids serious
injury and material damage.
b) In the event of a malfunction, turn the product off immediately and disconnect it
from the power source. Have it checked and, if necessary, repaired by a qualified
professional before putting it back into operation.
User manual
Part name
1. Switch of laser marker
2. Handle
2a. Auxiliary handle
3. Laser marker
4. Scale of cutting angle
5. Cutting angle setting screw
6. Screw for setting the parallel stop/guide
7. Circular saw foot
8. Swinging guard
9. Hex screw
10. Swinging cover lever
11. Connector for connecting dust extraction devices
12. On/Off switch
13. Scale for cutting depth
