ATTACHING THE WHEELS
Check that the pins in the
pushchairs legs are protruding
through the wheel housings.
Check the wheels are correctly
fitted by trying to pull them
off again.
– 6 –
Attaching the front wheels:
Slot the two front wheels
onto the ends of the
pushchairs front legs.
Push the wheel housing onto
the end of the leg until it
locks into position.
Always check that the wheels
are correctly fitted by
attempting to pull them off
again.
Attaching the back wheels:
Slot the rear wheels onto the
back legs of the pushchair.
Ensure that the brake peddles
on the wheels are facing out
from the back of the
pushchair. Push the wheels
down as far as they will go.
FITTING & REMOVING THE BASKET
– 7 –
The back section of the
basket has four webbing
loops and these fit over the
four hooks attached to the
back legs of the pushchair.
We recommend that you do not exceed a load of 3kg in the
basket. Excessive weight could lead to the basket becoming
damaged and the pushchair becoming unstable
Folding the pushchair with the basket fitted:
When folding
the pushchair always check that the basket is not trapped or
preventing the pushchair from locking.
The two front webbing loops
fit over the hooks on the font
legs of the pushchair.
The hooks are situated just
below the frame locks on
either side of the frame.
Summary of Contents for Pliko combination
Page 19: ... 36 Notes ...
