Removing the carrycot:
Grip the centre of the
carrying handle with one
hand.
With the other hand, slide the
locking handle (positioned on
the foot end of the carrycot)
horizontally and then upwards
and hold.
Still holding the lock up, lift
the carrycot clear of the
pushchair.
Once the carrycot has been
removed always refit the
bumper bar,
see page 9
.
Slide the locking catches on
sides of the chassis outwards
and push the attachment
brackets down.
Never place a child in the
pushchair with the brackets
up.
FITTING THE NAVETTA CARRYCOT - CHASSIS MODE
Apply the brakes on the
chassis and remove the
bumper bar if it is fitted.
Turn the two Navetta brackets
on the back of the chassis
outwards as shown.
Raise the legrest sections into
the highest setting.
In the corners of the seat unit
where the backrest joins the
seat base there are two flaps.
Under the flap are the
attachment brackets. Rotate
the attachment bracket
upwards as far as it will go.
The bracket will lock in a
vertical position.
Before fitting the carrycot to
the pushchair you will need to
remove the bumper bar as
shown on page 9.
Align the locking clip of the
carrycot with the attachment
brackets of the pushchair.
Push the carrycot down onto
the attachment brackets until
it clicks into place.
Check the carrycot is firmly in
place by attempting to lift it
upwards.
– 29 –
– 28 –
Summary of Contents for Pliko combination
Page 19: ... 36 Notes ...
