– 33 –
– 32 –
Insert the five panels into the
pockets in the sides of the
liner. The longest panel (
1
)
goes into the pocket in the
end of the liner. The two small
panels (
2
) go into the next
pockets down from panel 1.
The medium panels (
3
) go into
the pockets in the other end
of the liner.
FITTING THE THE PRAM LINER (ACCESSORY)
The pram liner is used to convert the Pliko Combination into a pram for
babies who cannot sit up by themselves.
Attach the seat to the chassis
in the rearward facing
position. Lower the backrest
into the lowest position and
raise the footrest into the
second highest position.
Slot the liner onto the seat
units seat cover. Ensure that
the end of the liner with the
inserted panel (1) is at the
backrest end of the seat unit.
Push the sides of the liner
over the sides and ends of the
seat unit and over the bumper
bar.
To remove the liner, simply
reverse the process used for
fitting it.
The hood and apron can be
fitted to the seat unit to keep
your baby warm.
Attach the Navetta hood as
shown on page 20.
Slot the apron onto the
backrest end of the
pushchhair.
Place your baby on the liner
with the crotch strap between
its legs. Slot the two tabs
through the loop in the top of
the crotch strap and fasten
the velcro pads together.
Fasten the press studs on the
backrest end of the liner to
the two press studs on the on
the back of the backrest.
Summary of Contents for Pliko combination
Page 19: ... 36 Notes ...
