Chapter 4
System Overview
Page 4-12
MAN 0486
Connecting the Zetasizer Nano
It should be noted that the Zetasizer Nano system should initially be
commissioned by Malvern trained personnel. This section will show how to re-
install the system, typically required under the following circumstances:
Moving the instrument
.
Changing the computer
.
Installing the system
ill 7905
Connect the USB cable to the connector marked
USB
on the rear panel of the
Zetasizer Nano instrument
. Connect the other end of the cable to the USB
connection on the computer
.
Connect the power cable to the power socket on the rear panel of the
instrument
.
Warning!
This product must be connected to a protective earth
Make all computer connections (mouse, keyboard, power, etc) by following
the instructions provided with your computer.
2
1
4
3
6
5
7
Zetaszier Nano Basic Guide (Man0486-1.0).book Page 12 Monday, September 10, 2012 2:19 PM
