manualshive.com logo in svg

Malvern Nano Series, Basic Manual

Share
Download
Malvern Nano Series Basic Manual Download Page 17

Site requirements

 Chapter 2

Zetasizer Nano Basic Guide

Page 2-5

MPT-2 Titrator services

Nitrogen purge specification

Warning!

A Nitrogen supply must be used in a well ventilated environment.

The MPT-2 Titrator has a purge connector for connection of a Nitrogen purge 
supply. This can be used to blanket the area directly above the sample and prevent 
any absorption of Oxygen that may change the pH characteristics of the sample, i.e. 
cause a pH drift.

If a Nitrogen supply is required it must conform to these specifications:

The Nitrogen supply must be dry, free from oil and filtered to remove any 
contaminants that could affect the sample.

The flow rate should be adjustable between 2 and 20 ml/min.

Computer specification

Contact the Malvern Helpdesk or website for the recommended computer 
specification. This is also provided in the Software Update Notification.

Zetaszier Nano Basic Guide (Man0486-1.0).book  Page 5  Monday, September 10, 2012  2:19 PM

Summary of Contents for Nano Series



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands