manualshive.com logo in svg

Malvern MPT-2, User Manual, Page: 77 / 85

Share
Download
Malvern MPT-2 User Manual Download Page 77

Appendices

 Appendix A

MPT-2 & Degasser

Page A-7

Teflon AF® Solvent Compatibility 

is:

Teflon AF® is inert to all solvents normally used in HPLC.

Teflon AF® is soluble in perfluorinated solvents such as Fluorinert® FC-75 
and FC-40 and Fomblin perfluoro polyether solvents from Ausimont.

Freon® solvents will adversely affect Teflon AF®.

Use of inappropriate solvents in the Vacuum Degasser will result in the dissolution 
and hence destruction of the membrane.

Caution!

Use appropriate care when handling flammable solvents. Make sure that 
there are no leaks in the titrant lines - refer to 

General Operation - Ini-

tial pump-down

. Ensure that hazardous exhaust gases are properly 

vented.

Corrosion

All parts that contact the titrant (solvents) are made of PEEK, Kel-F®, Tefzel® or 
Teflon AF®, PTFE or Glass-filled PTFE

PEEK is sensitive to Sulphuric acid and certain solvents.

MAN0318-4.0 -  MPT-2 Autotitrator-Degasser.book  Page 7  Tuesday, September 4, 2012  12:15 PM

Summary of Contents for MPT-2






















































































Reviews:

No comments