Malvern MPT-2, User Manual, Page: 72 / 85

Appendix A Appendices
Page A-2 MAN 0318
A
Vacuum degasser
General
Power
Validation Output
Operating Conditions
Dimensions: Height: 5.0 in.
Width: 2.87 in.
Depth: 9.81 in.
Weight 6 lb
Channels 3 independent
Degassing Process Gas permeation through a fluoropolymer mem-
brane
Maximum Flow Rate 10 mL/min.
Degassing Capacity ~2 ppm at 1 mL/min.
Dead Volume ~480 microliters per channel for standard channel
Materials contacting
titrant/solvents PEEK, Glass-filled PTFE, Teflon AF®, PTFE
Power requirement using
supplied AC Adapter 100 to 240 VAC, 1A, 50 to 60 Hz
Interchangeable adaptor
plugs 4 supplied with AC Adapter
Interchangeable to AC Adaptor: North America/
Japan, U.K., Continental Europe, Australia
Installation Over-Voltage
Category II (IEC 60664)
Signal 5 mVDC / 1 mm Hg absolute from 20 to 800 mm
Hg (0.100 VDC at 20 mm Hg; 4.000 VDC at 800
mm Hg)
Accuracy ±1.0% of reading ±0.010 VDC from 20 to 800 mm
Hg
Ambient Temperature 10 to 35 ºC
Ambient Relative Humidity 20 to 80 % RH (without condensation)
Altitude 0 to 2000 Meters
Indoor vs. Outdoor Use Indoor
Pollution Degree 2 (IEC 60664
MAN0318-4.0 - MPT-2 Autotitrator-Degasser.book Page 2 Tuesday, September 4, 2012 12:15 PM