background image

|

 35

 
C E R T I F I C A T E S

CERTIFICATE

CERTIFICATE

DIN EN ISO 14001:2015

Management system as per

Evidence of conformity with the above standard(s) has been furnished  

and is certified in accordance with TÜV PROFICERT procedures for

Certificate registration No.  

73 104 1297

Audit report No.   4352 8721   

First certification 2013-10-01

Certificate valid from 2019-10-01 to 

2022-09-30

scope:

PAGE 1 OF 1. 

This certification was conducted in accordance with the  TÜV PROFiCERT auditing and certification procedures and is subject to

regular surveillance audits. Verifiable under www.tuev-club.de. Original certificates contain a glued on hologram.

TÜV Technische Überwachung Hessen GmbH, Robert-Bosch-Straße 16, D-64293 Darmstadt, Tel. +49 6151/600331   Rev-GB-1711 

Darmstadt,  2019-09-26 

Certification body of  TÜV Hessen 

– Head of Certification body –

D-ZM-14137-01-00

Development, manufacturing and distribution of 

clinic- and health care bed systems, room furnishing

Betten Malsch GmbH

Rohbergstraße 9

36208 Wildeck - Obersuhl

Germany

CERTIFICATE

CERTIFICATE

DIN EN ISO 9001:2015

Management system as per

Evidence of conformity with the above standard(s) has been furnished  

and is certified in accordance with TÜV PROFICERT procedures for

Certificate registration No.  

73 100 1297

Audit report No.   4352 8721   

First certification 2004-07-21

Certificate valid from 2019-10-01 to 

2022-09-30

scope:

PAGE 1 OF 1. 

This certification was conducted in accordance with the  TÜV PROFiCERT auditing and certification procedures and is subject to

regular surveillance audits. Verifiable under www.tuev-club.de. Original certificates contain a glued on hologram.

TÜV Technische Überwachung Hessen GmbH, Robert-Bosch-Straße 16, D-64293 Darmstadt, Tel. +49 6151/600331   Rev-GB-1711 

Darmstadt,  2019-09-26 

Certification body of  TÜV Hessen 

– Head of Certification body –

D-ZM-14137-01-00

Development, manufacturing and distribution of 

clinic- and health care bed systems, room furnishing

Betten Malsch GmbH

Rohbergstraße 9

36208 Wildeck - Obersuhl

Germany

CERTIFICATE

CERTIFICATE

ISO 13485:2016 

EN ISO 13485:2016+AC:2016

 

Management system as per

Evidence of conformity with the above standard(s) has been furnished  

and is certified in accordance with TÜV PROFiCERT procedures for

Certificate registration No.  73 105 1297
Audit report No.   4310 8904   

First certification 2017-07-11

Certificate valid from 2019-04-01 to 2020-07-10

scope:

PAGE 1 OF 1. 

This certification was conducted in accordance with the  TÜV PROFiCERT auditing and certification procedures and is subject to

regular surveillance audits. Verifiable under www.proficert.com. Original certificates contain a glued on hologram.

TÜV Technische Überwachung Hessen GmbH, Robert-Bosch-Straße 16, D-64293 Darmstadt, Tel. +49 6151/600331   Rev-GB-1904 

Darmstadt, 2019-04-01 

Certification body of  TÜV Hessen 

– Head of Certification body –

D-ZM-14137-01-01

Development, manufacturing and distribution of 

clinic- and health care bed systems, room furnishing

Betten Malsch GmbH

Rohbergstraße 9

36208 Wildeck - Obersuhl / Germany

Summary of Contents for Impulse Series





































Reviews: