|
25
Side rail adjustment VGS
Split side rails VGS
1. In the standby position, the side rails are located next
to the reclining surface. In this position, they prevent the
mattress from slipping.
2. To raise the side rail, pull it upwards with both hands un-
til it engages with an audible click. This middle-height
head-end side rail setting is suitable for use as an occu-
pant mobility support. (Fig. A, 1)
3. Release the side rail for telescopic movement us-
ing the two spring catches below the hand rail and
adjust it to the maximum height. Pull the rail up-
wards using both hands simultaneously (Fig. B,
1/2). Take care not to tilt and jam the element.
Follow these actions in reverse to lower the rail.
Do not force the movement!
4. To lower the side rail, push the two release slides in-
wards with both hands (Fig. A, 2) and lower the side rail
carefully into the rest position.
Caution! When raising the side rails and side
rail height extensions, ensure and check that
the latches engage securely. Always use both
hands to move this element!
1.
2.
Fig. B
Fig. A
2.
1.
