Malsch IMPULSE KL, Instruction Manual

Page: 57 / 64

| 57
ELECTROMAGNETIC COMPATIBILIT Y (EMC)
The bed is intended for operation in the electromagnetic environments listed below. The customer or user of the bed must ensure that
it is used in a suitable environment.
Guidelines and manufacturersʼ declarations – electromagnetic emissions
Emission measurement Compliance Electromagnetic environment directive
RF emissions, CISPR 11 Group 1 The bed uses HF energy exclusively for its internal functions. There-
fore, it produces very low HF emissions, and it is unlikely that nearby
electronic devices will be adversely affected.
RF emissions, CISPR 11 Class A The bed is suitable for use in all facilities including those that are direct-
ly connected to a public supply network that also supplies buildings
used for residential purposes.
HF emissions IEC 61000-3-2 Class A
Voltage fluctuations and flicker IEC 61000-3-3 Compliant
Guidelines and manufacturersʼ declarations – electromagnetic resistance
Phenomena EMC basic
standard or test
procedure
Environments in domestic
health care areas
Compliance level Electromagnetic environment – directives
Static electrici-
ty discharge IEC 61000-4-2 ± 8 kV contact ±8 kV contact The flooring material must be wood or
concrete. If synthetic materials are used, the
relative humidity must be at least 30 percent.
± 2 kV; ± 4 kV; ± 8 kV;
± 15 kV air discharge ± 2 kV; ± 4 kV; ± 8 kV; ± 15 kV air
discharge
High-frequency
electromagnet-
ic fields IEC 61000-4-3 10 V / m 10 V/m Portable and mobile radio devices must
not be used closer to the hospital bed and
its cables than the recommended distance
calculated using the equation applicable to the
frequency of the transmitter.
80 MHz to 2.7 GHz 80 MHz to 2.7 GHz
80 % AM at 1 kHz