Malsch IMPULSE KL, Instruction Manual

Page: 39 / 64

| 39
Integrated sleeping surface extension
(IMPULSE KL hospital bed with undercarriage Edition 400)
The IMPULSE KL hospital bed with undercarriage Edition 400
is equipped at the factory with an integrated sleeping surface
extension. The sleeping surface can be extended by 10 or 20 cm
using two locking bolts at the lower foot end.
The extension is activated without tools in three stages:
1. Pull both locking bolts upwards and then to the right un-
til they engage. The sleeping surface extension has been
released.
2. Reach below the foot board and carefully pull out the sleep-
ing surface extension by approx. 10 cm or 20 cm.
3. Finally, turn the locking bolts back to their original positions.
Push the bed extension back carefully until the mechanism
engages.
Caution! A mattress insert (accessory) must be
used with 20 cm extensions. To use a mattress in-
sert, first pull the bed extension out as far as it will
go. Once the insert has been positioned, continue
as described in point 3.
Caution! The sleeping surface extension must only
be activated by authorised specialist staff.
1.
2.
3.
Locking bolts
IMPULSE KL hospital bed with undercarriage Edition 400