2’
2’
2’
Rudder Kit Installation
Drill the entry holes as indicated.
Make sure to use drill bit size 3/32
or 2.3813mm.
Cut the supplied vectran lines in
half. Tie each half to the rudder
asseembly as indicated using the
D shackles. (see instruction, “How
to Tie Square Knots”.)
Align the rope loop to the side of
the kayak.
Once the loop is in the proper
position, and there is enough
tension; put an eyelet through the
loop and fasten the eyelet on the
kayak.
Position the round padeyes with
equal distance, and fasten them
on the kayak.
Drill the exit holes as indicated.
Use the same drill bit size as step
11.
8
7
9
11
12
10
2
www.malibukayaks.com [email protected] 1-877-952-9257
Malibu Kayaks LLC. all rights reserved.
