Rudder Kit Installation
From within the hatch find the
screws inside the kayak, put the
vectran lines into the clamps and
tie it down with the provided
locknuts as indicated.
Position the rudder blade at dead
center of the kayak.
Put the lines through the loop of
the footbrace straps as shown in
picture above.
17
Tie the square knots (see instruc-
tions, “How to Tie Square Knots”).
Now, you’re ready to use the
rudder kit.
18
20
19
INSIDE
4
www.malibukayaks.com [email protected] 1-877-952-9257
Malibu Kayaks LLC. all rights reserved.
