Rudder Kit Installation
Put the footbrace into the tracks,
make sure it is facing to the
stopper side of the tracks.
Install the V-Block as above
picture. Make sure there is enough
space between the rudder blade
and the handle. Plus, the blade
should exceed the V-Block by 1”.
Install the rudder bracket at the
back of the kayak. Make sure the
tab is pointing upward.
Install the rudder assembly into
the rudder bracket.
Attach the split ring to the end of
the rudder as indicated.
Install the tracks on the kayak as
shown in the picture above .
1
3
4
5
2
stopper
tab
1”
handle
rudder
blade
6
1
www.malibukayaks.com [email protected] 1-877-952-9257
Malibu Kayaks LLC. all rights reserved.
