iii
1
FCC Radiation Hazard Warning
To ensure compliance with FCC RF exposure
requirements, this device must be professionally installed
outdoors on a permanent structure with an antenna that is
separated from all persons by a minimum of two meters.
Using higher gain antennas and types of antennas not
covered under the FCC certification of this product is not
allowed. Installers of the radio and end users of the system
must adhere to instructions provided in this manual.
Safety
Warning:
To avoid shock, do not open or attempt to
service the unit or its associated power supply. This unit is
not a user serviceable device.
Warning:
Do not touch antennas when transmission is in
progress. Possible adverse health affects can occur.
Warning:
When used with the ANT-24-19-D 19 dBi
directional CPE antenna, the transmit power must not be set
higher than 50 mW (+17 dBm).
Warning:
Explosive Device Proximity Warning do not
operate your wireless network device near unshielded
blasting caps or in an explosive environment unless the
device has been modified to be especially qualified for such
use.
Caution:
This instrument transmits radio frequency
energy during normal operation. Do not stand or work in its
close proximity for extended periods of time to avoid possible
harmful exposure. The long-term health effects of exposure
to radio frequency energy are not fully understood.
WARNING
WARNING
WARNING
WARNING
CAUTION
Summary of Contents for AirMAX 240
