Adding CPEs From the BTS
35
Installation and Configuration
3
Configuration
Adding CPEs From the BTS
To add CPEs to a BTS fixed wireless broadcast area,
you run a web browser from a PC attached to the BTS,
just like you did when configuring, but this time you go
to the
Management
screens, specifically
the CPEs
web
page.
Figure 3-6. CPEs Page
When the page is loaded, you ll see a list at the top
showing all the currently defined CPEs for the BTS. If
none are yet defined (as shown in the example above),
you ll just see the list headings.
To add a new CPE to the BTS, follow this procedure
and select or make entries in the fields on the page:
1.
Enter the CPEs Wireless MAC address. If not
known, you can get this data later when
This is a list of all CPEs
defined so far
Summary of Contents for AirMAX 240
