Malibu Boats AirMAX 240, Installation & Configuration Manual

Page: 31 / 82

Configuring the BTS
25
Installation and Configuration
3
Configuration
Worksheet:
Before starting either BTS and CPE configuration,
please have the following information ready. You can
get these values from your network administrator. The
terms are explained later in this manual where used.
Configuring the BTS
To configure the BTS, we ll connect a PC to the Power
Injector with a crossover cable, set the IP of the PC to
match the subnet of the default BTS configuration, and
then configure BTS software from a web browser.
Follow the detailed steps:
1. Connect a computer with a javascript-ready
internet web browser to the Power Injector via an
Ethernet crossover cable. Here we discuss using
a Windows 98/2000/NT/XP PC, but you could use
some other platform such as Linux or MacOS.
Power up the PC. (Chapter 2 provides photos and
details on physical installation.)
2. Enter the Network Control Panel (Settings/Control
Panels/Network) on the Windows PC, select the
Configuration Tab and TCP/IP definition screen
and then set the IP address of the PC to
Table 1. Initial TCP/IP Values Worksheet
Item Value Needed
gateway IP
subnet mask
IP addresses for
CPEs (1 for each if
using static IPs
this may not be
necessary)