Malibu Boats 21 VLX, Owner'S Manual

Page: 247 / 309

Avoid using ArmorAll or similar types of rubber-shine products. These will
actually accelerate deterioration of the product, rather than protecting it.
Such damage is not covered under warranty.
Hull and Deck Finishes
The majority of the finish surface of the hull and deck is a fiberglass-reinforced resin. While the boat material
is sturdy, to ensure an enjoyable experience while boating, the fiberglass-and-resin layers and gel coat finish
(where the paint is embedded) is very thin—only a few millimeters in depth. To keep it looking like new, it is
important to keep it clean and waxed.
Only a mild detergent and warm water should be used to clean these surfaces. Avoid all harsh cleaners as
they will quickly erode the finish.
Use only a mild detergent, such as dishwashing soap, and warm water
to wash the fiberglass-and-resin and gel coat finishes on the boat. Harsh
detergents and cleaners will quickly damage the finish, and this is not
covered under warranty.
If you choose to wash the boat at a car wash, do so with care. Stay back from the boat surface to avoid
potential damage from the high-pressure sprayer, and do not use the soap setting as most car-wash soaps are
intended to deal with highway-type debris such as salt, road tar and similar environmental hazards. Wash the
boat by hand with mild detergent as noted above, and then rinse carefully.
2020 Malibu Boats LLC • Owner’s Manual • Page 233