Malaguti Dune X 125, Service Station Manual

Page: 98 / 272

Dune 125 - Dune X 125 - Euro 4
Electrical system
ELE SYS - 98

If there is no continuity, restore the wir-
ing harness.

If OK, replace the instrument panel if
the vehicle performs properly.
Warning light "N" always on
Error cause

Possible malfunction
Troubleshooting

Disconnect the terminals from the sen-
sor and verify that, with the transmis-
sion in gear, there is continuity with the
ground.

If there is continuity, replace the sen-
sor.

If there is no continuity this meansthat
there is a short to ground of the green
black cable which goes to PIN 3 of the
control unit, therefore restore the wir-
ing harness.

If there is no continuity, restore the wir-
ing harness.

If there is no continuity, replace the wir-
ing harness.
Clutch lever sensor
Function
Indicates the clutch lever position to the control
unit
Operation / Operating principle
In order to start the engine, pull the clutch also with
the gear in neutral
Level in electrical circuit diagram
Start enable switches
Position

Sensor: under clutch lever

Connector: ...