Malaguti Dune X 125, Service Station Manual

Page: 213 / 272

Dune 125 - Dune X 125 - Euro 4
Chassis
CHAS - 213
Installing

After fitting the chain on the pinion and
on the crown, connect the two ends of
the chain by placing the inner plate (1)
complete with pins on the chain.

Put the outer plate (2) into position.

Using a general purpose riveter (3), riv-
et the chain pins in several points.
Adjusting
To check the clearance:

Shut off the engine.

Rest the vehicle on the side stand.

Select neutral.

Check that the vertical oscillation at a
point between the pinion and the
sprocket on the lower branch of the
chain is 35 - 40 mm (1.38 -1.57 in).