24
12.SHIPPING AND HANDLING
A)
PLACING THE BOILER ON VEHICLE
Wh
ile placing the boiler on a vehicle
, loading must be
done with a forklift.
Gates of the
v
ehicle body must be opened previously.
The boiler should be lifted by passing the forklift blades to the knife holes in
the boiler base plate.
Avoid sudden movements when the boiler is on a forklift.
Move the boiler next to vehicle
to be loaded with the least amonut of lift
from the ground as possible
.
After the boiler placed next to vehicle,
l
ift the
boiler from 30-40cm higher than the vehicle body and and take it down on
vehicle
chassis slowly.
ATTENTION
: When the boiler
is
lifted up with
a forklift
, there shouldn't
be
any living being under the boiler. Boiler must be carried with its
accessories installed on it.
B)
CARRYING BOILER ON VEHICLE
When the boiler is carrying with vehicle, it must be tied to vehicle strictly,
supporting
stuff which would prevent slipping, should be put around. Boiler
should not
be
carr
ied along
with
fragile, smashable and living beings. Top
of the vehicle must be covered with canvas
after placing boiler. Driver must
keep away from the sudden moves that would cause
danger.
C)
UNLOADING THE BOILER TO THE PLACE OF USE
Boiler should not be placed in work or residence places, it must be placed
in a
seperate boiler room.
When unloading the boiler to boiler room,
forklift
must be used again,
points that stated in Clause A, must be considered.
If the place of use is not appropriate for
forklift
entrance, boiler must be
unload in a proper place and carr
ied
with rollers to the place intended.
