MAKSIWA CBC.T, Instruction Manual

Page: 7 / 80

7
2 Description
This Maksiwa Automatic Edgebander Titanium CBC.T is a master piece of engineering, packet with
features that will make your job easier giving you a product finish like never before. Super steady and
stable, with a stainless-steel mono-block base. All operating units are easy to be accessed through
the upper protection hood. The friction-free worktable feed panels with high-precision and rollers
moves the panels through effortlessly and smoothly. All stations are adjusted with a mechanical
readout for reference and panel processing is fully automatic with all operating units synchronized.
The Maksiwa Titanium Automatic Edgebander CBC.T is incredibly versatile, it handles panels up to
45 mm thick, automatic feed and spread glue directly on the workpiece. It will work with edge tape
thickness from 0.4 to 3 mm.
2.1 Lifting and Transport
Preferably use a forklift or trans-pallet to handle transport of machine. To avoid any accidents during
transport, make sure the machine is firmly secured to the fork lift with ropes or other suitable
systems. The machine can be lifted with ropes, belts or slings, adequate to the machine weight, and
hooked on.
2.2 Location of Machine
The machine is delivered with a thermal shrined nylon protection for transport, some parts of the
machine are detached. Locate the machine in a suitable place, considering the overall dimensions
of the machine, space needed for stacking, loading and offloading work-pieces leaving sufficient
space for the operator. The machine base must be lay on a solid surface and well leveled. Use a water
level (or other good quality level) to check the working table is leveled in both directions. Tolerance
+- 0.25mm in longitudinal direction. It is possible to fix the machine to the floor by screwing the 4
holes made on the bottom of the base.
2.3 Specifications
• Working table height: 850 mm
• Extensible support width: 560 mm
• Panel thickness (min/max): 8/45
• Automatic belt feeder speed: 9 mt/1’
• End trimming unit rotation speed: 12,000 RPM
• Flush trimming unit rotation speed: 12,000 RPM
• (T.C.T) cutters: Ø75mm Z4 R=2mm
2 Description