8
guide when making a cross-section cut; and never cut a large workpiece with loose knots or
other defects.
• ATTENTION: Any powder created by sanding, cutting, grinding, drilling, and other activities
contains chemicals that can cause cancer, birth and other reproductive harm. Some examples of
these products are: in lead; crystal silica brick, cement and other masonry products; and arsenic
and chromium from chemically treated wood.
• CAUTION: Do not connect the machine to the power outlet until this manual is read and
understood.
• Always tighten the adjusting tabs before using the saw. Keep hands 15 cm (6 in) away from the
saw blade. Never perform operations hands-free and never cross your arms in front of the saw
blade. Think, “ How can I avoid accidents?”.
• Do not operate the saw without the guards being in place. Never put your hands on the saw
blade. Always wear safety goggles. Turn off the power and wait for the blade to stops before
starting to service or making adjustments.
1 Safety Regulations
