P 2/ 13
R
epair
[1] NECESSARY REPAIRING TOOLS
CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”.
Code No.
Description
Use for
1R003
Retaining ring pliers ST-2N
making Link plate free when disassembling Brake section
1R269
Bearing extractor
1R291
Retaining ring S & R pliers
removing Ball bearings
removing Retaining ring S-10 from the shaft of Spiral bevel gear 37
[2] LUBRICATION
Apply
the mixture of 90% Makita grease FA. No.2 with 10% Molybdenum disulfide
to the following portions
designated with the black triangle to protect parts and product from unusual abrasion.
Fig. 1
Item No.
Description
Link plate complete
Compression spring 9
Coil portion
Gear housing
Gear room where Spiral bevel gear 37 engages with Spiral
bevel gear 12 of Armature
Worm gear
Gear teeth which engages with Oil pump
Gear teeth which engages with Drive gear complete
Oil pump
42
Amount
a little
a little
a little
a little
5g approx.
Portion to lubricate
Spiral bevel gear 37
Adjust screw
Thread portions
(available for UCXX51A series/ TLC models)
Drive gear complete
Adjust pin
Brake band
Bearing housing
69
Sprocket cover complete
70
42
44
48
69
70
Straight bevel gear 14
48
44
