P 13/ 13
Fig. D-3
Wiring in Handle set
Main switch
Rib I
Switch for Kick back brake
Pin
Boss
Rib G
Noise
suppressor
(If it is used.)
Lead wire
holder A
Put Closed end splice
to this place.
Lead wire
holder B
Fix Controller’s lead wires (blue or white, red)
and Field lead wires (yellow, orange) in
Lead wire holder C as not to put Controller’s
lead wire (blue or white) on the top.
Main switch
Route Lead wires
between Pins and
Boss.
Fix Noise suppressor’s lead wires
(2 whites) in these Lead wire holders.
Rib D
Rib C
Rib E
Route Controller’s lead wires
between Rib D and Motor
housing.
Controller
Put Noise suppressor between Rib F and
Rib G while facing its wire connected
side to the bottom of Handle L.
Route Controller’s lead wires (blue, red)
between Bearing box of Motor housing
and Rib E.
Fix Controller’s lead wires (black) and
Field lead wire (yellow) in these lead
wire holders.
Route Controller’s lead wires
between Rib C and Rib D.
Field lead wires have to be
tightened between Lead wire
holder C and Motor housing.
Rib H
Put Field’s Lead wire
(yellow) into this
Lead wire holder
between Lead wire
holder A and Switch.
Without piling on the other
lead wires, fix Lead wires
in Lead wire holder A
and Lead wire holder B
Route Lead wires of Main switch
between Rib H and Rib I.
Rib F
Lead wire holder C
Fix Controller’s lead wires in these lead
wire holder as not to put Controller’s lead
wire (blue) on the top.
