8 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model
MLT100
(for European countries)
(for other than European
countries)
Arbor hole
30 mm
25 mm and 25.4 mm
Blade diameter
260 mm
255 mm
Blade body thickness
1.9 mm or less
Max. cutting capacities
90°
93 mm
90.5 mm
45°
64 mm
63 mm
No load speed (min
-1
)
4,300
Table size (L x W)
(685 mm - 835 mm) x (955 mm
- 1,305 mm) with sub tables (R)
and (back)
(685 mm - 835 mm) x (955 mm
- 1,305 mm) with sub tables (R)
and (back)
Dimensions (L x W x H) with table(s) not extended
726 mm x 984 mm x 333 mm
with sub tables (R) and (back)
726 mm x 984 mm x 333 mm
with sub tables (R) and (back)
Net weight
34.1 kg
34.1 kg
Safety class
/II
• Due to our continuing program of research and development, the specifications herein are subject to change with
-
out notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
DOUBLE INSULATION
Wear safety glasses.
Do not place hand or fingers close to the
blade.
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of the European Directive,
on Waste Electric and Electronic
Equipment and its implementation in
accordance with national law, electric
equipment that have reached the end of
their life must be collected separately and
returned to an environmentally compatible
recycling facility.
Intended use
The tool is intended for cutting in wood.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined accord
-
ing to EN61029:
Sound pressure level (L
pA
) : 92 dB (A)
Sound power level (L
WA
) : 105 dB (A)
Uncertainty (K) : 3 dB (A)
Wear ear protection
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions.
Failure to follow the warnings and instruc-
tions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for
future reference.
ADDITIONAL SAFETY RULES FOR
TOOL
SAVE THESE INSTRUCTIONS.
1.
Wear eye protection.
2.
Do not use the tool in presence of flammable
liquids or gases.
3.
NEVER use the tool with an abrasive cut-off
wheel installed.
