![background image](http://html.mh-extra.com/html/makita/maktec-mt362/maktec-mt362_technical-information_1722858007.webp)
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -5. Stopper on Base complete
[3] -6. Base plate
DISASSEMBLING
ASSEMBLING
ASSEMBLING
Disassemble Stopper as drawn in
Fig. 8
.
Assemble Stopper by reversing the disassembly procedure. (Refer to
Fig. 8
)
Note
:
1
. Thread locker is applied to M6 (-) Flat head screw. After applying “
ThreeBond 1342
or
Loctite 242
”
to the thread portion, drive the screw to Base complete.
2
. The fastening torque for M6 (-) Flat head screw is
1.8 - 3.5 N·m
.
M4x10 (+) Countersunk head screws are coated with thread locker. While assembling Base plate to Base complete
with removed M4x10 (+) Countersunk head screws, apply “
ThreeBond 1342
or
Loctite 242
” to the thread portion
of the screws.
Fig. 9
M4x10 (+) Countersunk head
screw (4 pcs)
Base plate
1. M6 (-) Flat head screw can be removed by turning it
clockwise
.
And remove Compression spring 12.
2. Remove Stopper from Base.
Stopper
(-) M6 Flat head screw
Compression 12
Base complete
Fig. 8
P
7
/
9