![background image](http://html.mh-extra.com/html/makita/maktec-mt362/maktec-mt362_technical-information_1722858004.webp)
R
epair
ASSEMBLING
(1) Assemble Armature by reversing the disassembly procedure. (Refer to
Fig. 3
)
(2) Assemble Motor housing to Base. (Refer to
Fig. 2
)
Note
: Make sure that
Lock pin
is already mounted to Motor bracket. (Refer to the
right
drawn in
Fig. 2
)
(3) Assemble M10 Nylon nut and Knob 50. (
Fig. 4
)
Fig. 4
M10 Screw
(Integral part
of Base complete)
M10 Nylon nut
M10 Nylon nut
M10
Nylon nut
Knob 50
M10 Screw
Knob 50
Knob 50 which is assembled
not precisely to M10 Nylon nut
gap
Pins
3. Drive M10 Nylon nut with Knob 50 while pressing
so carefully down the nut that the gap does not arise
between Knob 50 and M10 Nylon nut.
2. Insert Pins of Knob 50 into the Pin holes
on M10 Nylon nut in order to drive
M10 Nylon nut with Knob 50.
Pin holes
3A. Trouble of the big gap can be solved by taking the following step.
1. Remove Knob 50 from M10 Nylon nut. And make a half turn of the knob to get the opposite
angle position of its Pins to Pin holes of the nut. Then insert it into M10 Nylon nut again.
2. Drive M10 Nylon nut with Knob 50.
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Armature (cont.)
1. Drive M10 Nylon nut
until its surface comes
to the same line to the
surface of M10 Screw.
P
4
/
9