![background image](http://html.mh-extra.com/html/makita/maktec-mt362/maktec-mt362_technical-information_1722858006.webp)
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -4. Lock Lever
ASSEMBLING
1. Insert Lock pin deeply into the hole for Lock lever of Motor bracket.
Then, tighten M8x16 Set bolt turning it counterclockwise until it stops.
Fig. 7
(1) Assemble Base to the machine. (Refer to the
right
drawing in
Fig. 2
)
(2) Assemble Lock lever to Motor bracket as drawn in
Fig. 7
.
3. Install Lock lever onto the hex head portion of M8x16 Set bolt within the range of
0 degree to 30 degrees. And, place the long arm of Torsion spring 16 so that it is
fixed at the wall beside Lock lever. Then, fasten it with M4x14 Pan head screw.
2. Set Torsion spring 16 in place of Lock lever
as drawn below.
Lock lever
Long arm of Torsion spring 16
30°
Wall
Pan head screw M4x14
Lock pin
M8x16 Set bolt
Lock lever
Torsion
spring 16
Short arm:
into Lock lever
Long arm:
to outside of Lock lever
Note
: Fastening torque for
M8x16 Set bolt is
0.5 - 1.0 N·m
.
P
6
/
9